Mix equal parts olive oil and lemon juice. Apply the mixture to a clean cloth and rub it onto the stainless steel surface. Olive oil helps to shine and protect, while lemon juice cuts through grime. Wipe with a dry cloth to remove any excess.

Mix baking soda with a small amount of water to form a paste. Apply the paste to the stainless steel surface using a soft cloth or sponge. Gently rub the paste in the direction of the grain to remove stains and smudges. Rinse with a damp cloth and dry with a clean towel.

Spray white vinegar directly onto the stainless steel surface. Let it sit for a few minutes to cut through grease and grime. Wipe with a clean cloth, following the grain of the steel. Vinegar also helps to remove water spots and leave a streak-free finish.

Use a commercial stainless steel cleaner, which is specifically formulated for these surfaces. Follow the product’s instructions for application. These cleaners often come with built-in polishes that help to maintain the appliance’s shine.

Mix hydrogen peroxide with water (50/50 ratio) and apply it to the stainless steel surface with a soft cloth. Hydrogen peroxide helps to disinfect and remove stains. Wipe clean and dry with a microfiber cloth to avoid streaks.

For regular maintenance, use a microfiber cloth dampened with water or a small amount of dish soap. Microfiber is effective at picking up dust, dirt, and fingerprints without scratching the surface. Dry with a clean, dry microfiber cloth.

Mix lemon juice with baking soda to create a scrub. Apply the mixture to stubborn spots or stains and gently rub with a soft cloth. The acidic lemon juice combined with baking soda’s abrasiveness helps lift stains. Rinse with water and dry.

After cleaning, sprinkle a small amount of cornstarch on the stainless steel surface. Buff with a clean, dry cloth. Cornstarch helps to polish and remove any remaining streaks, leaving a shiny finish.

Slice a lemon and place the slices in a microwave-safe bowl filled with water. Microwave on high for 3-5 minutes until the water boils and steam condenses on the microwave walls. Let it sit for a few minutes to allow the steam to loosen grime, then wipe down the interior with a clean cloth or sponge.

Mix baking soda with a small amount of water to form a paste. Apply the paste to any stubborn stains or residue inside the microwave. Let it sit for 10-15 minutes, then scrub with a damp cloth or sponge. For additional cleaning power, spray a mixture of white vinegar and water over the paste before scrubbing.

Apply a commercial microwave cleaner according to the product instructions. These cleaners are specifically designed to remove grease and food particles. Follow the manufacturer’s guidelines for application and rinsing.

Use a handheld steam cleaner to clean the microwave interior. The steam helps to loosen food particles and sanitize surfaces. After steaming, wipe down with a damp cloth to remove any residues.

Mix 1-2 tablespoons of baking soda with water to create a cleaning solution. Dip a cloth or sponge into the solution and scrub the interior of the microwave. Baking soda helps to deodorize and clean stains. Rinse with a damp cloth and dry.

Mix a few drops of dish soap with warm water. Dip a cloth or sponge into the soapy water and clean the interior of the microwave. This method is effective for everyday cleaning and removing light residue. Rinse with a clean, damp cloth and dry.

Use a microwave-safe cleaning gel designed for appliances. Follow the instructions on the gel packaging. These gels can help break down food particles and stains, making it easier to wipe the interior clean.

Dampen a few paper towels with white vinegar and place them in the microwave. Heat on high for 1-2 minutes until the vinegar vaporizes. Allow the steam to loosen grime, then wipe the interior with the paper towels.

Mix baking soda with a small amount of warm water to form a thick paste. Apply this paste to the shelves and let it sit for 15-20 minutes to loosen grime. Scrub with a sponge or cloth, then rinse thoroughly with warm water. This as well, helps remove odors and stains effectively.

Mix equal parts white vinegar and water in a spray bottle. Spray the solution directly onto the shelves and let it sit for a few minutes. Wipe down with a clean cloth. Vinegar effectively cuts through grease and deodorizes.

Fill a sink or basin with warm water and add a few drops of dish soap. Remove the shelves from the refrigerator and soak them in the soapy water. Use a sponge or dishcloth to scrub away stains and residue, then rinse with clean water and dry thoroughly.

A commercial refrigerator cleaner or all-purpose cleaner. Follow the manufacturer’s instructions for application. These cleaners are formulated to handle tough stains and disinfect surfaces.

Combine lemon juice and baking soda to create a paste. Apply the paste to shelves, especially where there are stubborn stains or odors. Let it sit for 10-15 minutes, then scrub and rinse.

Simply use a microfiber cloth dampened with warm water to wipe down the shelves. This method is effective for regular maintenance and light cleaning, as the microfiber can trap dust and dirt without the need for additional cleaners.

Spray hydrogen peroxide directly onto the shelves and let it sit for a few minutes. This helps disinfect and remove stains. Wipe with a clean cloth and rinse with water.

For a more thorough clean, use a handheld steam cleaner on the shelves. The high temperature of the steam helps to sanitize and dissolve grime. After steaming, wipe down with a clean, damp cloth to remove any residues.

Run a cycle with a mixture of equal parts water and white vinegar to clean the coffee maker’s internal components. Follow up with a cycle of plain water to rinse.

Dissolve 1-2 tablespoons of citric acid in water (about 4 cups). Pour the solution into the coffee maker’s reservoir and run a brewing cycle. Citric acid is a natural cleaner and descaler that helps remove mineral deposits and build-up. Follow up with a few cycles of clean water to rinse.

Mix 1-2 tablespoons of baking soda with water and pour it into the coffee maker’s reservoir. Run a brewing cycle to clean and neutralize odors. Afterward, run several cycles of fresh water to thoroughly rinse the coffee maker.

Combine equal parts white vinegar and lemon juice and fill the reservoir with the mixture. Run a brewing cycle to help dissolve scale and remove residues. Rinse thoroughly by running several cycles of fresh water.

Purchase a commercial coffee maker cleaning solution, such as those specifically designed for coffee machines. Follow the manufacturer’s instructions for usage, which usually involves running the cleaner through the machine and rinsing with water.

Mix equal parts hydrogen peroxide and water and pour it into the coffee maker’s reservoir. Run a brew cycle to clean the interior components. Rinse thoroughly with fresh water to remove any remaining hydrogen peroxide.

Remove the carafe, filter basket, and any other detachable parts. Soak them in a solution of warm water and a few drops of dish soap. Scrub with a brush or sponge, rinse thoroughly, and let them dry before reassembling.

Use specialized cleaning tablets designed for coffee makers. Place a tablet in the reservoir or follow the instructions provided with the product. These tablets are formulated to effectively clean and descale coffee makers.

Place the racks in a bathtub filled with hot water and a few dishwasher tablets. Let them soak for a few hours or overnight. Scrub and rinse for a fresh look.

Use a specialized oven cleaner for heavy-duty grime. Apply the cleaner according to the manufacturer’s instructions, usually to the racks in a well-ventilated area. Allow it to sit for the recommended time, then scrub with a brush or sponge and rinse thoroughly.

Mix hydrogen peroxide with baking soda to form a thick paste. Apply the paste generously to the oven racks and let it sit for 30 minutes to an hour. The paste helps to break down grease and grime. Scrub with a brush or sponge and rinse well.

Place the oven racks in your bathtub or a large sink and cover them with hot water. Add a few dishwasher tablets or a mixture of baking soda and vinegar to the water. Let the racks soak for a few hours or overnight. The steam and cleaning agents will help loosen the grime. Scrub with a brush and rinse thoroughly.

If your oven has a self-cleaning feature, you can use it to clean the racks as well. Remove the racks from the oven before starting the self-cleaning cycle, as the high temperatures can damage them. Place the racks in a separate location, such as a bathtub with a cleaning solution, to clean them while the oven is self-cleaning.

Mix equal parts white vinegar and water in a spray bottle. Spray on the greasy areas, let it sit for a few minutes, and wipe with a microfiber cloth.

Apply a natural citrus-based degreaser to the greasy areas on your cabinets. Citrus oils are effective at cutting through grease and leaving a fresh scent. Spray the degreaser, let it sit for a few minutes, and then wipe clean with a damp cloth.

Create a paste using dish soap and baking soda. Apply the paste to greasy spots and let it sit for 10-15 minutes. The baking soda helps to lift the grease, while the dish soap cuts through it. Scrub with a sponge or cloth and rinse thoroughly.

Mix equal parts white vinegar and olive oil in a spray bottle. Spray the solution on the greasy areas and let it sit for a few minutes. Wipe away with a clean cloth. The vinegar cuts through the grease, and the olive oil helps to shine and condition the cabinet surface.

Combine baking soda and lemon juice to form a paste. Apply this paste to greasy areas and let it sit for 10-15 minutes. The acidity of the lemon juice, along with the abrasiveness of the baking soda, helps to break down and remove grease. Scrub and rinse well.

Use a commercial grease-fighting cleaner designed for kitchen surfaces, such as Krud Kutter or a similar product. Follow the instructions on the label for best results. These cleaners are formulated to effectively dissolve grease and are often used in professional settings.

Sprinkle baking soda on the stains, add a few drops of water to make a paste, and let it sit for 15 minutes. Scrub with a sponge and rinse clean.

Fill the pan with enough water to cover the burnt areas. Add 1/2 cup of baking soda and 1/2 cup of white vinegar. Let it sit and simmer for 15-20 minutes, then use a scrub brush or sponge to remove the stains. This combination helps to lift and loosen burnt-on residues.

Place a dryer sheet in the pan and fill it with warm water. Let it soak for several hours or overnight. The sheet’s fabric softener helps to loosen burnt-on food. After soaking, use the sheet and a sponge to scrub away the stains.

Cut a lemon in half and dip the cut side into coarse salt. Use this lemon-salt combination to scrub the burnt areas of the pan. The acidity of the lemon and the abrasiveness of the salt work together to lift stains. Rinse well after scrubbing.

Mix 2 tablespoons of cream of tartar with enough water to form a thick paste. Apply this paste to the burnt areas and let it sit for 30 minutes. Scrub with a sponge or brush and rinse thoroughly. Cream of tartar acts as a gentle abrasive and cleaner.

Use a commercial cleaner specifically designed for burnt-on stains, such as Bar Keepers Friend or similar products. Follow the product instructions, applying it to the stained areas and scrubbing as directed. These cleaners are formulated to tackle tough stains and residues.