Tips and Hacks on How to Easily Clean Your Bathroom

9 Hacks on How to Get Rid of Soap Scum in the Shower

Use Vinegar and Water

Fill a spray bottle with equal parts white vinegar and water. Spray the mixture on the soap scum, let it sit for 10 minutes, then scrub with a sponge and rinse.

Use a Vinegar and Dish Soap Solution

Mix equal parts white vinegar and dish soap in a spray bottle. Spray the solution onto the soap scum and let it sit for 15-20 minutes to loosen the buildup. Scrub with a sponge or brush, then rinse thoroughly with warm water.

Try a Baking Soda and Hydrogen Peroxide Paste

Create a paste by mixing baking soda with hydrogen peroxide. Apply the paste to the soap scum and let it sit for 15-30 minutes. The baking soda acts as an abrasive while the hydrogen peroxide helps to break down the scum. Scrub with a brush or sponge and rinse well.

Use Lemon Juice and Baking Soda

Combine lemon juice with baking soda to form a paste. Apply the paste to the soap scum and let it sit for 10-15 minutes. The acidity of the lemon juice and the abrasiveness of the baking soda work together to clean the surface. Scrub and rinse with warm water.

Try a Cream-Based Cleaner

Use a cream-based cleaner like Bar Keepers Friend or similar products. Apply the cleaner to the soap scum, following the product’s instructions. These cleaners are designed to cut through tough grime and leave surfaces shiny.

Use a Magic Eraser

Wet a magic eraser and gently scrub the soap scum. Magic erasers are effective at removing soap scum and other residues without the need for additional cleaning products. Rinse the area with water afterward.

Use a Magic Eraser

Apply a White Vinegar and Baking Soda Combo

Sprinkle baking soda directly onto the soap scum and then spray with white vinegar. The mixture will fizz and help lift the scum. Let it sit for 10 minutes, scrub, and rinse with warm water.

Use a Steam Cleaner

For a thorough clean, use a steam cleaner to tackle soap scum. The high-temperature steam helps to dissolve and loosen soap scum and grime. Follow up with a wipe-down to remove any remaining residues.

8 Hacks on How to Get Rid of Toilet Bowl Stains

Use Borax and Lemon Juice

Sprinkle 1/2 cup of borax around the inside of the toilet bowl, then add 1/4 cup of lemon juice. Let the mixture sit for at least 30 minutes or overnight. Scrub with a toilet brush and flush to rinse. The borax helps to lift stains, while the lemon juice adds acidity to break down grime.

Try a Baking Soda and Vinegar Solution

Sprinkle 1 cup of baking soda into the toilet bowl, then add 1-2 cups of white vinegar. Let it sit for 30 minutes. The combination of baking soda and vinegar creates a fizzing action that helps to dissolve stains. Scrub with a toilet brush and flush to rinse.

Use Hydrogen Peroxide

Pour 1 cup of hydrogen peroxide into the toilet bowl. Let it sit for about 30 minutes. Hydrogen peroxide has disinfecting properties and helps to break down stains. After sitting, scrub with a toilet brush and flush.

Apply a Commercial Toilet Cleaner

Use a commercial toilet cleaner specifically designed for tough stains. Apply the cleaner according to the instructions on the label. These products are formulated to tackle stains, disinfect, and leave the toilet bowl clean.

Try a Pumice Stone

Wet a pumice stone and gently scrub the stained areas inside the toilet bowl. Pumice stones are effective at removing mineral deposits and stains without scratching the porcelain. Rinse the bowl thoroughly after scrubbing.

Use a Cream Cleaner

Apply a cream-based cleaner like Bar Keepers Friend to the stained areas. Let it sit for 15-20 minutes, then scrub with a toilet brush or sponge. The cream cleaner helps to lift tough stains and polish the surface.

Try a Citric Acid Solution

Dissolve 2-3 tablespoons of citric acid in a bowl of warm water. Pour the solution into the toilet bowl and let it sit for at least 30 minutes. Citric acid helps to dissolve stains and mineral deposits. Scrub with a brush and flush.

Use a DIY Bleach Solution

Mix 1/2 cup of bleach with 1 gallon of water. Pour the solution into the toilet bowl and let it sit for about 30 minutes. Bleach helps to disinfect and remove stains. Scrub with a brush and flush, ensuring proper ventilation when using bleach.

8 Hacks on How to Self-Clean Your Shower Doors:

Use a Vinegar and Water Solution

Mix equal parts white vinegar and water in a spray bottle. Spray the solution onto the shower doors and let it sit for 10-15 minutes to dissolve soap scum and water spots. Wipe with a microfiber cloth or sponge, then rinse with warm water and dry with a clean towel.

Try a Baking Soda and Vinegar Paste

Create a paste by mixing baking soda with a small amount of water. Apply the paste to the shower doors, focusing on areas with tough stains or buildup. Spray with white vinegar, let it fizz and sit for 10 minutes, then scrub with a sponge or brush. Rinse thoroughly.

Use a Lemon Juice and Baking Soda Scrub

Mix lemon juice with baking soda to form a scrub. Apply this mixture to the shower doors and scrub with a sponge or brush. The acidity of the lemon juice helps to cut through grime, while the baking soda acts as a mild abrasive. Rinse well.

Employ a Commercial Glass Cleaner

Use a commercial glass cleaner designed for tough stains and soap scum. Apply the cleaner according to the manufacturer's instructions. These products are formulated to clean and shine glass surfaces effectively.

Try a Magic Eraser

Wet a magic eraser and gently scrub the shower doors to remove soap scum and water spots. Magic erasers are effective at lifting residue without the need for additional cleaners. Rinse and wipe down with a damp cloth.

Use a DIY Salt and Lemon Juice Solution

Combine salt with lemon juice to create a natural abrasive cleaner. Apply this mixture to the shower doors, scrub gently, and then rinse thoroughly. The salt provides a mild abrasive action, while the lemon juice helps to break down grime.

Apply a Dish Soap and Baking Soda Solution

Mix a few drops of dish soap with baking soda and water to form a paste. Apply the paste to the shower doors and scrub with a sponge. The dish soap cuts through grease, while the baking soda helps to remove buildup. Rinse and wipe clean.

Use a Commercial Soap Scum Remover

For persistent soap scum, use a commercial soap scum remover specifically designed for shower doors. Follow the product instructions for application and ensure the area is well-ventilated.

10 Hacks on How to Self-Clean Your Faucets and Fixtures

Use a Baking Soda and Lemon Juice Paste

Mix baking soda with lemon juice to form a paste. Apply the paste to the faucets and fixtures, focusing on areas with grime or water spots. Let it sit for 10-15 minutes, then scrub gently with a soft brush or cloth. Rinse thoroughly and dry with a clean towel.

Try a Vinegar and Water Soak

Fill a small plastic bag with white vinegar and secure it around the faucet or fixture with a rubber band. Let it sit for 30 minutes to an hour to dissolve mineral deposits and grime. Remove the bag, scrub with a toothbrush or sponge, and rinse with warm water.

Use a Commercial Metal Cleaner

Use a commercial metal or faucet cleaner designed for your fixture type (e.g., chrome, brass). Follow the manufacturer's instructions for application. These cleaners are formulated to remove tarnish, water spots, and buildup effectively.

Apply a Citric Acid Solution

Dissolve 1-2 tablespoons of citric acid in a cup of warm water. Apply the solution to faucets and fixtures using a cloth or sponge. Let it sit for 10-15 minutes to break down mineral deposits. Scrub and rinse well.

Use a Microfiber Cloth with Warm Water

For regular maintenance, wipe faucets and fixtures with a microfiber cloth dampened with warm water. Microfiber cloths effectively pick up dust, dirt, and water spots without scratching. Dry with a clean, dry cloth to avoid streaks.

Try a Dish Soap and Baking Soda Solution

Mix a few drops of dish soap with baking soda to form a cleaning paste. Apply this paste to faucets and fixtures, and scrub with a toothbrush or sponge. Rinse thoroughly with warm water and dry with a cloth.

Use a Hydrogen Peroxide Solution

Soak a cloth or cotton ball in hydrogen peroxide and apply it to the faucets and fixtures. Let it sit for 10-15 minutes to help disinfect and lift grime. Scrub gently if needed and rinse well.

Employ a Commercial Lime and Scale Remover

Use a commercial lime and scale remover designed for removing mineral deposits. Apply according to the product’s instructions. These removers are effective for tackling tough scale and mineral build-up.

Use a Pumice Stone for Stubborn Deposits

Wet a pumice stone and gently rub it on stubborn deposits or stains on faucets and fixtures. Pumice stones are effective at removing tough residues without scratching, but use them cautiously to avoid damage.

Try a Salt and Vinegar Solution

Mix salt with white vinegar to form a paste. Apply this paste to the faucets and fixtures, scrubbing gently to remove stains and build-up. Rinse with warm water and wipe dry.

13 Tips and Hacks on How to Self-Clean Your Bathroom Ventilation Fans

Use a Vacuum with a Brush Attachment

Use a vacuum cleaner with a brush attachment to gently remove dust and debris from the ventilation fan. Turn off the power to the fan before cleaning, and use the vacuum to clean the fan blades and the surrounding area.

Apply a Dusting Spray and Microfiber Cloth

Use a dusting spray to lightly mist the fan blades and housing. Follow up by wiping down with a microfiber cloth to remove dust and grime. Ensure the fan is turned off and dry before resuming use.

Use a Compressed Air Can

Use a can of compressed air to blow dust and debris out of the fan blades and housing. Hold the can upright and use short bursts to avoid excessive moisture buildup. This method is effective for removing loose dust.

Try a Soap and Water Solution for the Fan Cover

Remove the fan cover or grille (if removable) and wash it with warm, soapy water. Use a sponge or cloth to scrub away grime. Rinse thoroughly, dry completely, and reattach to the fan.

Clean with a Feather Duster

Use a feather duster to reach and clean the fan blades and surrounding areas. Feather dusters can effectively capture and remove dust without scattering it.

Use a Toothbrush for Detailed Cleaning

Use a clean, dry toothbrush to gently brush away dust and debris from the fan blades and other hard-to-reach areas. This method is useful for getting into tight spaces and around the fan’s components.

Try a Magic Eraser

Wet a magic eraser and gently rub it on the fan blades and the fan housing to remove dirt and grime. Magic erasers are effective at cleaning without harsh chemicals. Rinse and dry thoroughly.

Use a Combination of Baking Soda and Water

Mix baking soda with a small amount of water to form a paste. Apply the paste to the fan blades and any other grimy areas. Let it sit for 10 minutes, then scrub gently with a cloth or sponge. Rinse with clean water.

Clean with a Damp Cloth and Vinegar Solution

Mix equal parts water and white vinegar in a spray bottle. Lightly spray the solution onto the fan blades and housing. Wipe with a damp cloth to remove dust and grime. Ensure the fan is dry before turning it back on.

Use a Soft-Bristled Brush

Use a soft-bristled brush to gently sweep away dust and debris from the fan blades and surrounding areas. This method is gentle on surfaces and effective at removing buildup.

Always Turn Off Power

Before cleaning, make sure the power to the fan is turned off to avoid any electrical hazards.

Regular Maintenance

Clean your bathroom ventilation fan regularly (every 3-6 months) to prevent excessive buildup and ensure proper ventilation.

Check the Fan Motor

If your fan is making unusual noises or not working efficiently, it might need more thorough maintenance or professional servicing.

Information

Stay connected with us through our social media channels for updates, promotions, and cleaning tips!

Navigation

Our Services

Allright Reserved - ATEB Cleaning Services